Publications
- Subscale Stress-Managed Common Coil Design / 2024 [PDF]
- Increasing the design freedom in Additive Manufacturing / 2021 [PDF]
- Enabling Complex SLM Parts Based on a Process Parameter Model / 2020
- Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb3Sn Demonstrator Under High Magnetic Field / 2024
- Subscale Stress-Managed Common Coil Design / 2024 [PDF]
- Efficient Reduced Magnetic Vector Potential Formulation for the Magnetic Field Simulation of Accelerator Magnets / 2024 [PDF]
- Reliability Engineering of Cryocooler-Based HTS Magnets for FCC-ee / 2023 [PDF]
- Test Results From CD1 Short CCT Nb3Sn Dipole Demonstrator and Considerations About CCT Technology for the FCC-Hh Main Dipole / 2023 [PDF]
- From Hot to Cold: Advanced Materials and Processes for NbSn Based Magnets /2023 [PDF]
- Training Curves of Nb3Sn Rutherford Cables With a Wide Range of Impregnation Materials Measured in the BOX Facility / 2023 [PDF]
- Magneto-Mechanical Optimization of Cross-sections for cos-theta Accelerator Magnets / 2022 [PDF]
- Improved training in paraffin-wax impregnated Nb3Sn Rutherford cables demonstrated in BOX samples / 2022 [PDF]
- Comparison of Different Adiabatic Matching Device Designs for the FCC-ee Positron Source, Proceedings of IPAC Brazil / 2021 [PDF]
- BOX: an efficient benchmark facility for the study and mitigation of interface-induced training in accelerator type high-field superconducting magnets / 2021 [PDF]
- Study of a Current-Based Quench Detection Method for CCT Magnets via a Co-Wound Superconducting Sensing Wire / 2021 [PDF]
- 2020 Update of the European Strategy for Particle Physics / 2020 [PDF]
- The 2020 Updated Roadmaps for the US Magnet Development Program / 2020 [PDF]
- Modeling of Quench Protection Concepts for Canted-Cosine-Theta Type High-Field Magnets / 2020 [PDF]
- Analysis of Quench Detection and Protection of a Nb3Sn CCT Technology Demonstrator Dipole for FCC / 2020 [PDF]
- FCC-hh: The Hadron Collider / Future Circular Collider Conceptual Design Report Volume 3 / 2019 [PDF]
- FCC-ee: The Lepton Collider / Future Circular Collider Conceptual Design Report Volume 2 / 2019 [PDF]
- FCC Physics Opportunities / Future Circular Collider Conceptual Design Report Volume 1 / 2019 [PDF]
- Coil Manufacturing Process of the First 1-m-Long Canted–Cosine–Theta (CCT) Model Magnet at PSI / 2019 [PDF]
- The 16 T Dipole Development Program for FCC / 2017 [PDF]
- Model-Based System Engineering Framework for Superconducting Accelerator Magnet Design / 2023
- Experimental results of a YBCO bulk superconducting undulator magnetic optimization / 2024 [PDF]
- Pulse magnetized superconducting bulk array undulator concept / 2024 [PDF]
- A GdBCO Undulator for Tomographic Microscopy at the new Swiss Light Source, SLS2.0 /2024 [PDF]
- GdBCO bulk superconducting helical undulator for x-ray free-electron lasers / 2023 [PDF]
- Record field in a 10 mm-period bulk high-temperature superconducting undulator / 2023 [PDF]
- Review and prospects of world-wide superconducting undulator development for synchrotrons and FELs / 2022 [PDF]
- Inverse analysis of critical current density in a bulk high-temperature superconducting undulator / 2022 [PDF]
- Fully-staggered-array bulk Re-Ba-Cu-O short-period undulator: large-scale 3D electromagnetic modelling and design optimization using A-V and H-formulation methods / 2021 [PDF]
- A REBCO Superconducting Permanent Magnet Undulator / 2021 (Youtube)
- A GdBCO bulk staggered array undulator / 2020 [PDF]
- Fast and efficient critical state modelling of field-cooled bulk high-temperature superconductors using a backward computation method / 2020 [PDF]
- Magnetization Current Simulation of High-Temperature Bulk Superconductors Using the ANSYS Iterative Algorithm Method / 2020 [PDF]
- Numerical Design Optimization of Short-Period HTS Staggered Array Undulators / 2020 [PDF]
- Magnetization Simulation of Rebco Tape Stack With a Large Number of Layers Using the Ansys A–V–A Formulation / 2020 [PDF]
- HTS magnets for light sources / 2019 (Video)
- XLS-Report-2019-004 / 2019
- Stampanoni M et al CDR TOMCAT2.0: Multiscale Multimodal Dynamic Tomographic X-rayMicroscopy / PSI Internal Document
- Degradation of Ic due to residual stress in high-performance Nb3Sn wires submitted to compressive transverse force / 2023 [PDF]
- Formation and propagation of cracks in RRP Nb3Sn wires studied by deep learning applied to x-ray tomography [PDF]
- Tomography analysis tool: an application for image analysis based on unsupervised machine learning / 2022 [PDF]
- Machine learning applied to X-ray tomography as a new tool to analyze the voids in RRP Nb3Sn wires / 2021 [PDF]
- Effects of the initial axial strain state on the response to transverse stress of high-performance RRP Nb3Sn wires / 2021 [PDF]
- Determination of the electromechanical limits of high-performance Nb3Sn Rutherford cables under transverse stress from a singlewire experiment / 2020 [PDF]
- The 16 T Dipole Development Program for FCC / 2017 [PDF]
- Design of an electron source for the FCC-ee with top-up injection capability / 2024 [PDF]
- A positron source demonstrator for future colliders / 2023 [PDF]
- On positron beam dynamics an initial part of a large aperture FCC-ee capture linac / 2023 [PDF]
- Benchmarking the FCC-ee positron source simulation tools using the SuperKEKB results / 2023 [PDF]
- Update on the FCC-ee positron source design studies / 2023 [PDF]
- Use of a superconducting solenoid as a matching device for the compact linear collider positron source / 2023 [PDF]
- Damping ring and transfer lines of FCC-𝑒+𝑒− injector complex / 2023 [PDF]
- Considerations for a new damping ring design of the FCC-ee pre-injector complex / 2023 [PDF]
- Proof-of-principle e+ source for future colliders / 2023 [PDF]
- Radiation Load Studies for the FCC-ee Positron Source with a Superconducting Matching Device / 2022 [PDF]
- Optimization of the FCC-ee Positron Source Using an HTS Solenoid Matching Device / 2022 [PDF]
- The FCCee Pre-Injector Complex / 2022 [PDF]
- RF Design of Traveling-Wave Accelerating Structures for the FCC-ee Pre-injector Complex / 2022 [PDF]
- The PSI Positron Production Project / 2022 [PDF]
- Comparison of Different Matching Device Field Profiles for the FCC-ee Positron Source / 2021 [PDF]
- Machine learning for beam dynamics studies at the CERN Large Hadron Collider / 2021 [PDF]
- Simulations of particle loss due to hollow e-lens and non-linearities for the HL-LHC / 2020 [PDF]
- Modeling of the emittance growth due to decoherence in collision at the Large Hadron Collider / 2020 [PDF]
- ARIES-APEC workshop on Mitigation Approaches for Hadron Storage Rings and Synchrotrons / 2020
- Beam transfer function measurements used to probe the transverse Landau damping at the LHC / 2020 [PDF]
- ICFA mini-workshop on Mitigation of Coherent Beam Instabilities in particle accelerators (MCBI 2019) / 2019 [PDF]
- FCC-hh: The Hadron Collider / Future Circular Collider Conceptual Design Report Volume 3 / 2019 [PDF]
- HE-LHC: The High-Energy Large Hadron Collider / Future Circular Collider Conceptual Design Report Volume 4 /2019 [PDF]
- MD3288: Instability latency with controlled noise / 2019 [PDF]
- MD 3290: Instability threshold measurements in the presence of a controlled external excitation / 2019 [PDF]
- MD 3292: Measurements of Landau Damping by Means of BTF Measurements / 2019 [PDF]
- Updated High-Energy LHC Design / 2019 [PDF]
- Developments in the Experimental Interaction Regions of the High Energy LHC / 2019 [PDF]
- Beam Transfer Function Measurements and Transverse Stability in presence of Beam-Beam / 2018 [PDF]
- Landau Damping Studies for the FCC: Octupole Magnets, Electron Lens and Beam-Beam Effects / 2018 [PDF]
- FCC-hh Experimental Insertion Region Design / 2007 [PDF]
CHART (Swiss Accelerator Research and Technology)